More than 150 countries customers enjoy the service of kulon

Home / Products / DR/DRP Series / 1-phase /

DRP-480S

DRP-480S

DRP-480S
DRP-480SDRP-480SDRP-480S
Categories1-phase
BrandMeanwell Switching Power Supply
ModelDRP-480S
Wattage480w
Input85-264VAC
Output(Vdc)24v,48v
PFCYes
SafetyUL,CB,CE,TUV,EMC
L*W*H227*125.2*100mm (W*H*D)
Warranty3 years
Update Time2021-07-28
Detail Information

480W Single Output DIN RAILwith PFC Function DRP-480S series

Feature:

  • AC input range selectable by switch

  • Built-in passive PFC function compliance to EN61000-3-2

  • High effciency 89% and low dissipation

  • Protections:short circuit/ overload / over voltage / Over temperature

  • Can be installed on DIN rail TS-35/7.5 or 15

  • Built-in constant current limiting circit

  • Cooling by free air convection

  • UL 508(industrial control equipement)approved

  • EN61000-6-2(EN50082-2) industrial immunity level

  • 100% full load burn-in test

  • 3 years warranty

specification:

MODEL DRP-480s-24 DRP-480s-48
OUTPUT DC VOLTAGE 24V 48V
RATED CURRENT 20A 10A
CURRENT RANGE 0 ~ 20A 0 ~ 10A
RATED POWER 480W 480W
RIPPLE & NOISE (max.) Note.2 120mVp-p 120mVp-p
VOLTAGE ADJ. RANGE 24 ~ 28V 48 ~ 53V
VOLTAGE TOLERANCE Note.3 ±1.0% ±1.0%
LINE REGULATION ±0.5% ±0.5%
LOAD REGULATION ±1.0% ±1.0%
SETUP, RISE TIME 1200ms, 40ms/230VAC at full load
HOLD UP TIME (Typ.) 23ms/230VAC,115VAC at full load
INPUT VOLTAGE RANGE 90 ~ 132VAC/180 ~ 264VAC by switch 254 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
POWER FACTOR (Typ.) ≧0.7/230VAC only
EFFICIENCY (Typ.) 89%  
AC CURRENT (Typ.) 8A/115VAC 3.2A/230VAC
INRUSH CURRENT (Typ.) COLD START 27A/115VAC 45A/230VAC
LEAKAGE CURRENT <3.5mA/ 240VAC
Review
  • Loading...
Get in Touch

Quick Service & Solution For Full Meanwell Products

If you have any questions about purchasing Meanwell products, any doubts in product selection, or any special needs for Meanwell products, welcome contact us as follows:

Stay in touch
Please send your message to us
*Email
*Name
*Tel
*Title
*Content