More than 150 countries customers enjoy the service of kulon

Home > Products > ELG Series > C.V.+C.C. >

ELG-100

ELG-100

ELG-100
ELG-100ELG-100ELG-100ELG-100ELG-100
CategoriesC.V.+C.C.
AlbumView larger image
BrandMeanwell Switching Power Supply
ModelELG-100
Wattage100W
Input100~305VAC
Output(VDC)24, 36, 42, 48, 54
PFCYes
SafetyCUL,CB,CE,ENEC,CCC,BIS,KC,EAC,BSMI
L*W*H199*63*35.5mm(L*W*H)
Warranty5 Years
Update Time2019-05-26
Detail Information

70~100W Constant Voltage + Constant Current LED DriverELG-100 series

  • Constant Voltage + Constant Current mode output

  • Metal housing design with functional Ground

  • Built-in active PFC function

  • Class 2 power unit

  • No load / Standby power consumption<0.5w

  • IP67 / IP65 rating for indoor or outdoor installations

  • Function options: output adjustable via potentiometer;3 in 1 dimming (dim-to-off);Smart timer dimming ;DALI

  • Typical lifetime>50000 hours

  • 5years warranty

specification:

MODEL ELG-100-12 ELG-100-24 ELG-100-36 ELG-100-42 ELG-100-48
OUTPUT DC VOLTAGE 24V 36V 42V 48V 54V
CONSTANT CURRENT REGION Note.2 12 ~ 24V18 ~ 36V21 ~ 42V24 ~ 4827 ~ 54V
RATED CURRENT 4.0A 2.66A2.28A2A1.78A
RATED POWER Note.5 200VAC ~ 305VAC
96W 95.76W95.76W 96W 96.12W
100VAC ~ 180VAC
70W70W70W70W70W
RIPPLE & NOISE (max.) Note.3 200mVp-p250mVp-p250mVp-p300mVp-p350mVp-p
VOLTAGEADJ. RANGE Adjustable forA/AB-Type only (via the built-in potentiometer)
21.6 ~ 26.4V32.4 ~ 39.6V37.8 ~ 46.2V43.2 ~ 52.8V48.6 ~ 59.4V
CURRENTADJ. RANGE Adjustable forA/AB-Type only (via the built-in potentiometer)
2 ~ 4A1.33 ~ 2.66A1.14 ~ 2.28A1 ~ 2A0.89 ~ 1.78A
VOLTAGE TOLERANCE Note.4 ±3.0% ±2.5%±2.5% ±2.0%±2.0%
LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
LOAD REGULATION ±1.0%±1.0% ±0.5%±0.5% ±0.5%
POWER FACTOR (Typ.) 1000ms, 80ms/115VAC 500ms, 100ms/230VAC
EFFICIENCY (Typ.) 15ms/115VAC 10ms/230VAC
INPUT VOLTAGE RANGE Note.5 100 ~ 305VAC 142 ~ 431VDC continue,320VAC for 24Hrs; 360VAC for 1Hr
(Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE 47 ~ 63Hz
POWER FACTOR PF 0.97/115VAC, PF 0.95/230VAC, PF 0.92/277VAC@full load
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTALHARMONIC DISTORTION THD< 20%(@load 50%/115VC; @load 60%/230VAC; @load 75%/277VAC)
(Please refer to “TOTALHARMONIC DISTORTION(THD)” section)
EFFICIENCY (Typ.) 88%89% 90% 90% 91%
AC CURRENT 1.1A/ 115VAC 0.6A/ 230VAC 0.5A/277VAC
INRUSH CURRENT(Typ.) COLD START 60A(twidth=850 s measured at 50% Ipeak) at 230VAC μ ; Per NEMA410
MAX. No. of PSUs on 16A
CIRCUIT BREAKER
3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT <0.75mA/ 277VAC
NO LOAD / STANDBY
POWER CONSUMPTION
No load power consumption <0.5W for Blank /A/ Dx / D2-Type
Standby power consumption <0.5W for B /AB / DA-Type
Get in Touch

Quick Service & Solution For Full Meanwell Products

If you have any questions about purchasing Meanwell products, any doubts in product selection, or any special needs for Meanwell products, welcome contact us as follows:

Stay in touch
Please send your message to us
*Email
*Name
*Tel
*Title
*Content

Agree to use terms of service